Our FAQs have been complied from our years in the radiant heating industry. Feel free to email us, with any questions you might have about our systems, applications or product lines.
Floor & Space Heating
ZMesh comes with an industry leading, 25-year manufacturer’s warranty.
Since 1979, Tuff Cable systems have been sold worldwide and are still in operation, worry free.
Tuff Cable comes with an industry leading, 25-year manufacturer’s warranty.
Tuff Cable is ETL Listed for snow and ice melting on surfaces and roofs and for interior floor heating applications.
General Heatizon Product Questions
All of our systems come with complete installation manuals and can be installed by any electrician, contractor, or experienced “do-it-yourselfer.” An electrician is needed to supply the necessary power and to Control Unit location. We also offer installation DVD clips for an installation reference. Heatizon offers unlimited technical support to customers.
Yes they sure can, this would fall under our under roof deicing system, or in snow melting look under deck and using a Invizimelt system with Tuff Cable.
Yes you can resurface a retrofit. There are products that can resurface concrete using epoxies or polymers. It can be thin or thick depending on which product is chosen.
Line voltage products like Heatizon lines of MI Cables, Heatwave floor warming mats, and Self Regulating Cables are fed by a typical 120V, 208V, 240V, 277V, 480V and in some cases for MI Cables up to 600V AC power. These products are either constant wattage single conductor or dual conductor or dual conductor self regulating. High voltage products do not require a transformer and are an economical solution for many projects. Typical high voltage products offer a lower warranty than low voltage products and more expensive circuit breaker components for outdoor applications than low voltage systems. Low voltage products use a step down transformer to convert high voltage to low voltage. These systems are very easy to repair compared to high voltage products while using a safe low voltage power source. Low voltage systems offer a higher warranty than their line voltage counterparts. Heatizon offers such a wide range of product choices because each and every one has an application where they fit best offering our customers a choice for the best product to fit their budget and application.
Heatwave
To upgrade the standard programmable thermostat (M429) to a programmable touchscreen thermostat, visit http://tilewarming.com and purchase the $170.00 touchscreen thermostat (M429-TS). Once you receive your new thermostat, send back the thermostat you received with your original Amazon order to the following address (You are responsible for paying return shipping costs), and you will receive a credit of $125.00 on your earlier order of $170.00, making the total $45.
Send thermostats for credit to:
THERMOSTAT UPGRADE
Heatizon Systems
4137 South 500 West
Murray, UT 84123
NOTE: Please properly package thermostat to ensure that it does not get damaged in return shipping. Use a shipping method that allows for tracking of the unit to verify delivery. No express shipping is required.
In the event that an accident has occurred and the heating element needs to be repaired, please visit: http://www.radiantshop.com/repairkit to purchase a repair kit. NOTE: This will have enough materials to do ONE repair. DO NOT repair the system more than two (2) times.
There are a few methods to secure the cable to the floor until it is embedded:
- Use a small amount of tape to hold the cable tot he floor. (do not cover ALL of the cable, just use small perpendicular strips to secure it)
- Hot glue is acceptable, provided that the tip of the glue gun DOES NOT touch the heating element. Do a small drop on the floor and press the heating cable into the drop.
- The mat comes with a tape on one side of the mat to aid in securing it to the floor.
- Staples may be used on the mesh portion of the mat. (DO NOT STAPLE THE RED HEATING CABLE)
Should you wish to bypass the various scheduling options on the M429 thermostat, follow the following procedures:
- Press the OK button twice to activate the main menu.
- Use the UP or DOWN buttons to scroll to MODE, then press OK.
- Use the UP or DOWN buttons to scroll to MAN. MODE, then press OK.
- Set desired temperature and press the OK button.
- Use the UP or DOWN buttons to scroll to EXIT, then press OK.
- Your thermostat will now maintain the set temperature. (Note: power bumps/losses may reset the thermostat back to a pre-programed schedule.)
NOTE: Using the thermostat in this manner may cause excessive power usage, especially if the space is inadequately insulated and/or the desired temperature is very high.
This is a sensor problem, here are a few fixes:
- Check to ensure the thermostat is firmly connected to the “C” and “D” ports behind the face plate of the thermostat.
- If you did not install a floor sensor or it is damaged, set the thermostat to red ambient temperature:
- Press the OK button twice to bring up the main menu.
- Use the UP or DOWN buttons to scroll to SETTINGS, then press OK.
- Use the UP or DOWN buttons to scroll to APPLICATION, then press OK.
- Use the UP or DOWN buttons to select ROOM, then press OK.
- Set desired temperature (some model of thermostat)
- Use the UP or DOWN buttons to scroll to EXIT, then press OK. (do this twice)
- Your thermostat will now measure the temperature of the room and NOT the floor sensor. (TIP: You may have to adjust the thermostat temperature higher or lower than expected to achieve desired floor temperature.)
- Test the floor sensor to measure resistance to check for resistance.
- Set your multimeter to the 200k Ohm (Ω) setting.
- touch a probe to each end of the sensor wire.
- A functioning floor sensor should get a reading between 9,000 and 25,000 ohms, if the sensor fails this test, please see #2 for how to switch to ambient air sensor.
NOTE: Whenever working on ANY wiring for the thermostat, please TURN OFF the breaker powering the thermostat and floor heating system.
The black connections points at the end of the heating cable and between the red heating cable and the black cold lead are engineered connection points and WILL heat up and it is crucial that BOTH of these connection points get fully embedded in thinset and/or mortar.
Since these connection points are thicker than the heating element, best advice is to chisel out a small groove for the connection point to sit in, in order to lower it’s profile.
DO NOT DAMAGE OR REMOVE EITHER OF THESE CONNECTION POINTS. THEY CANNOT BE REPAIRED.
There are a few things to do to mitigate excess cable/mat:
1. The best advice is if you still can return the mat/cable to Amazon especially if you have a large amount of excess cable and get the next size system down.
2. Tighten spacing between cable spacing (keep at least 2 inches of space between heating cable) and DO NOT overlap ANY heating cables or heating cable over any other cable.
3. Remove cable from the mat and run it into areas where the mat does not fit. (Use a small amount of tape or glue to keep the heating cable in place.)
Reminder, DO NOT, UNDER ANY CIRCUMSTANCES, CUT (OR ATTEMPT TO SHORTEN) THE READ HEATING CABLE. The heating cable is specifically engineered to be the length it is.
Roof Deicing & Heat Tracing
GutterMelt SR Cables are self regulating and do not over heat. The heat output of these cables increase as the surrounding temperature decreases and output decreases as surrounding temperatures increase. GutterMelt is perfectly fine to use with plastic downspouts due to these self regulating heating characteristics.
Our gutter heating cables (GutterMelt) are the ideal solutions for preventing dangerous and damaging snow and ice forming. It is recommended that gutter melting cables be used in conjunction with our roof systems. Our cable systems are also activated by automatic sensors that sit in the gutter. And conserve energy by only turning on when necessary.
The Tuff Cable Invizimelt/Heat Sink kits for roof deicing are designed to be installed under metal roof, valley metal and flashing. Tuff Cable must always be embedded completely in an Invizimelt/Heat Sink system regardless of which roof covering is going over it.
Tuff Cable is a resistance heating wire that is very durable, 10 gauge coated copper cable that is chemical resistant and comes with footage marks on the wire. The Tuff Cable has been engineered to work as a low-voltage system.
ZMesh was first used over 28 years ago. Since 1979 the 9” ZMesh systems have been sold worldwide and are still in operation.
ZMesh is ETL listed for the United States and Canada and conforms to UL Standard 1588. Heatizon Systems Roof Snow and Ice Melt products are the only products available today that are listed for under-roof applications.
ZMesh comes with an industry leading, 25-year manufacturer’s warranty.
It is not recommended that you use ZMesh underneath a metal roof. We recommended that Tuff Cable in Invizimelt/Heat Sink be used instead.
Roof deicing systems can be activated with an aerial-mounted moisture and temperature sensor, temperature sensor, gutter –mounted switch, or 12 hour manual timer. With the aerial-mounted moisture and temperature sensor with automatically turn on when the temperature is below 38 degrees and there is moisture on the sensor.
The largest 9” ZMesh system (zone) will cover approximately 425 square feet. Multiple zones are sometimes required for larger projects.
9” ZMesh is sandwiched in between two layers of ice and water shield and stapled to the roof decking. Shingles are then secured with nails directly on top. Nails can pierce the ZMesh as long as the nails do not come in contact with any other metal objects. The ZMesh comes in 9” wide rolls and is rolled out over the area to be heated. Heating at least 6” above the roof eaves is recommended.
No, because it is “paper thin” no roof buildup or construction alteration is required. ZMesh is 1/32” thick and 1/6” on the fold back. This is not the case with other types of radiant heat systems.
ZMesh is a 9” or 12” wide durable bronze heating element that resembles screen door material. It is used to melt ice and snow off roofs and is listed to be installed under shingles to UL standard 1588.
ZMesh is installed under shingles for several reasons. Heatizon offers a long term solution to winter roof problems and we believe in do the project once and do it right. ZMesh is protected when it is installed under the shingles and in most cases will outlast the roofing above. Thinking long term we offer an invisible solution as well as the longevity of a system that will perform for the long term so the customer will never have to worry again about winter roof problems. To install ZMesh existing shingles will need to be removed by a roofing contractor so it can be installed on the sub-roof with a layer of ice and water shield over the top of the system before shingles are installed back over it.
Yes, ZMesh can be installed over any membrane and covered with an additional membrane.
Since 1979, Tuff Cable systems have been sold worldwide and are still in operation, worry free.
Tuff Cable comes with an industry leading, 25-year manufacturer’s warranty.
Tuff Cable is ETL Listed for snow and ice melting on surfaces and roofs and for interior floor heating applications.
Tuff Cable is ETL Listed for the United States and Canada and conforms to UL Standard 1693. Heatizon Systems Roof Snow and Ice Melt products are the only products available today that are listed for under-roof applications.
Snow Melting & Heated Surfaces
MI Cables were first invented in 1896 and have been in use since the early 1900’s. These durable cables are a reliable system and Hott-Wire has been specially engineered for radiant heating being resistant to water absorption. The inert fiberglass reduces cable breakdown unlike Magnesium Oxide MI Cables. Hott-Wire has been sold worldwide.
The average operational cost for a snow melting system is approximately $0.18 per 100 square feet per hour. This figure is based on a system producing 22 watts/sq. ft. or 73.7 BTU’s/sq. ft. with a kwh rate of $0.08 per hour (the national average kwh is $0.08/hour). If you know the square feet of the area you wish to heat and your kwh rate, you can calculate the operational costs with this formula: heatable sq. ft. times watts/sq. ft., divided by 1000, times your kwh rate.
Hott-Wire systems can be activated with an aerial mounted moisture and temperature sensor, temperature sensor, pavement-mounted snow sensor, or 12 hour timer. The aerial and pavement mounted sensor will automatically turn on when the temperature is below 38 degrees and there is moisture on the sensor. Heatizon has its own engineered relay panel (M330) offering 30Amp or 50Amp relay switches for single activation of multiple circuits.
Hott-Wire heating cable is the perfect choice for snow melting in driveways, sidewalks and stairs. Hott-Wire systems can be installed in new pour concrete or asphalt, under tile or pavers in a sand bed, and can be retrofitted into existing concrete or asphalt.
Hott-Wire comes with an industry leading, 10-year manufacturer’s warranty. Hott-Wire is ETL Listed for snow and ice melting applications.
The power requirements vary from system to system. Generally Hott-Wire heating systems require a 208, 240, or 277 volt supply 30 Amp breaker for smaller areas. For larger areas a double pole 40 Amp breaker is used. Systems are designed to ASHRAE standards and vary in size and load depending on region and application
Hott-Wire is a resistance Mineral Insulated heating cable that is very durable. Hott-Wire is a fixed length line voltage element consisting of a central single or dual conductor surrounded by fiberglass inert insulation compressed in a Copper tube, which is coated with an HDPE Jacket. Hott-Wire has been engineered to work as a line voltage system.
Since 1979, Tuff Cable systems have been sold worldwide and are still in operation, worry free.
Tuff Cable comes with an industry leading, 25-year manufacturer’s warranty.
Tuff Cable is ETL Listed for snow and ice melting on surfaces and roofs and for interior floor heating applications.
Tuff Cable systems can be activated with an aerial mounted moisture and temperature sensor, temperature sensor, pavement-mounted snow sensor, or 12 hour timer. The aerial and pavement mounted sensor will automatically turn on when the temperature is below 38 degrees and there is moisture on the sensor.
Tuff Cable heating element is the perfect choice for snow melting in driveways, sidewalks and stairs. Tuff Cable systems can be installed in new pour concrete, under tile or pavers in a sand bed, and can be retrofitted into existing concrete or asphalt.
Tuff Cable is a resistance heating wire that is very durable, 10 gauge coated copper cable that is chemical resistant and comes with footage marks on the wire. The Tuff Cable has been engineered to work as a low-voltage system.
Tuff Cable can be retrofit in any asphalt, concrete, or cementitious base.